ISN-SM Seismic Detectors

ISN-SM Seismic Detectors
  • 24-hour surveillance of vault walls and doors, safes, night safes, and automatic teller machines
  • Sensitivity settings using DIP switches
  • SENSTEC® sensor and signal processing system based on microcontrollers
  • Low profile design
  • Details
    Compatibility: Better than EN 50130-4
    HF interference tolerance (EN 61000-4-3): No alarm or setup at critical frequencies within a range of 1 MHz to 1000 MHz at > 30 V/m.
    Dimensions: 8.9 cm x 8.9 cm x 2.2 cm    
    Weight: 0.320 kg
    Humidity (EN60721): Up to 95% relative humidity, not condensing
    Housing protection class (EN 60529, EN 50102): IP435
    Temperature (operating): -40 °C to +70 °C
    Temperature (storage): -50 °C to +70 °C
    For the test: Low < 1.5 VDC High > 3.5 VDC
    Test duration (including test transmitter ISN-GMX-S1): ≤ 3 sec
    Model Operating radius , Monitoring area
    Concrete Steel , Concrete
    ISN-SIM-50 4 m , 2 m , 50 m2
    ISN-SIM-80 5 m , 2,5 m , 80 m2
    Alarm relay (changeover contact): Contact closed in standby mode (opened in the event of an alarm) designed for 30 VDC, 100 mA, resistance < 20 Ohm
    Alarm holding time: Approx. 2.5 sec
    Tamper switch/wall tamper: Tamper contact closed in standby mode (opened in the event of tampering) designed for 30 VDC, 100 mA, resistance < 45 Ohm
    Test connection: Analog integration signal
    Power consumption at 12 VDC: Alarm: 6 mA
    Standby: 3 mA
    Power supply monitoring: 8 VDC to 16 VDC (12 V nominal)
    Alarm: < 7 VDC
    For reduction: Low < 1.5 VDC High > 3.5 VDC
    Reduction to: 1/8 of current setting
    SENSTEC® is a registered trademark of Siemens Building Technologies.

    Images

     
  • Certificates (5)
    Title Type Language
    UL PDF
    ULC PDF
    Declaration of Conformity PDF
    VdS PDF
    CCC PDF
     
  • Documents (5)
     
 

Product variants

ISN-SM-50 Seismic detector, 50m²

Seismic detector with 4m operating radius on concrete and 50m2 monitoring area.

Commercial Type No.: ISN-SM-50
Product No.: F.01U.002.248

 
ISN-SM-80 Seismic detector, 80m²

Seismic detector with 5m operating radius on concrete and 80m2 monitoring area.

Commercial Type No.: ISN-SM-80
Product No.: F.01U.002.246

 
 

Accessories

ISN-GMX-P0 Mounting plate for seismic detector

ISN-GMX-P0 Mounting plate for seismic detector

Mounting plate for seismic detectors. Suitable for mounting seismic detectors to steel or concrete surfaces.

Commercial Type No.: ISN-GMX-P0
Product No.: F.01U.003.366

 
ISN-GMX-PZ Swivel plate for ISN-SM-80

ISN-GMX-PZ Swivel plate for ISN-SM-80

Swivel plate for use with ISN-SM-80 seismic detectors.

Commercial Type No.: ISN-GMX-PZ
Product No.: F.01U.003.370

 
 
ISN-GMX-S1 Test transmitter

ISN-GMX-S1 Test transmitter

Test transmitter for installation under a seismic detector. Checks the detector and the physical contact between the detector and the protected object.

Commercial Type No.: ISN-GMX-S1
Product No.: F.01U.003.371

 
ISN-GMX-P3S2 Spacer (2mm)

ISN-GMX-P3S2 Spacer (2mm)

Spacer 2mm thick for swivel plate.

Commercial Type No.: ISN-GMX-P3S2
Product No.: F.01U.003.367

 
 

ISN-SMS-W7 Sensor tool PC software

Programming software for seismic detectors.

Commercial Type No.: ISN-SMS-W7
Product No.: F.01U.004.306