Security Escort Products


 
Central Console Software
  • Automatic redundancy switching between master and slave computers
  • Printer (with XPS and GDI format) and page support
  • Displays alarm location, name, picture, and additional subscriber (user) information
 
 
Security Escort
  • Fixed frequency of 433.42 MHz
  • Device controller for up to 15 receivers
  • Can be powered using Power over Ethernet (PoE)
  • Wired TCP/IP to the host central console; wired (RS-485) to receiver
  • Remote firmware upgradable via wired TCP/IP
  • Built-in 2 inputs and 2 relay outputs
  • Reports alarms, tests, tamper notification, AC power loss, and backup battery status
 
 
Security Escort
  • Fixed frequency of 433.42 MHz
  • Wired (RS-485) to coordinator
  • Wireless communication between receiver and transmitter
  • Built-in 2 inputs and 2 relay outputs
  • Remote firmware upgradable via wired RS-485
  • Buddy check self-testing
  • Indoor enclosure available
 
 
Security Escort
  • Fixed frequency of 433.42 MHz
  • Wireless configuring of transmitter parameters (e.g. transmitter profile, auto-tracking interval) via coordinator/receiver
  • Remote firmware upgradable wirelessly via dedicated coordinator
  • Manual duress / Man-down / Lanyard snatch alarms
  • Supervision tracking
  • Test mode
  • Low battery indication
 
 
Security Escort
  • Buddy Check self‑testing
  • Indoor enclosure available
  • Outdoor enclosure available
  • Tamper switch
 
 
Security Escort
  • Annunciates an alarm through the siren, strobe, or other third party switched device
  • Sends output to the siren and strobe to indicate a successful transmitter test
  • Is compatible with indoor enclosures
  • Is compatible with outdoor enclosures
  • Uses AC power with battery backup
  • Responds to central console commands sent through the transponder
 
 
Security Escort
  • Sends alarm and test signals from the receiver to the central console
  • Supports a combined total of 64 receivers and alert units
  • Uses AC power with battery backup for all receivers
  • Provides power to SE485 interface and spread spectrum radio
  • Monitors receivers and alert units ten times per second for alarms, tests, tamper notification, and power loss
  • Reports alarms, tests, tamper notification, AC power loss, and backup battery status
 
 
SE2 Series Personnel Transmitters
  • Manual duress alarm
  • Man‑down alarm
  • Supervision
  • Test mode
  • Low battery indication
  • Belt clip attachment
 
 
SE88 Series Panic Transmitters
  • Supervision
  • Manual duress alarm
  • Test mode
  • Low battery indication
  • Water resistant
 
 
Security Escort